// ENGINEERING — HIGH-NYL® · HIGH-TRON®

Engineering Plastics

Custom polyamide compounds under the HIGH-NYL® brand and high-performance PEEK under HIGH-TRON®. If the standard catalog does not meet your needs, we develop a formulation, color and reinforcement ratio specific to your application.

14HIGH-NYL® grades

PA6 · 66 · 12+ PA610 and transparent PA

Custom formulationColor, reinforcement, additives

343 °CHIGH-TRON® PEEK melting

// HIGH-NYL® Series

HIGH-NYL® polyamide portfolio

HIGH-NYL® is Hightech Polimer’s brand of custom engineering plastics. Unreinforced, glass fiber, mineral, impact-modified and heat-stabilized grades in PA6, PA66, PA12, PA610 and transparent long-chain polyamides; color and formulation are tuned to the application. The grades below have a technical data sheet (TDS) available.

Product	Matrix	Property	Processing	TDS
HIGH-NYL® A57 BLACK	PA66	Unreinforced · heat stabilized, impact resistant	Injection molding	Request
HIGH-NYL® A70 G30 H BLACK	PA66	30% glass fiber · heat stabilized	Injection molding	Request
HIGH-NYL® A70 H TM-X H GREY	PA66	Impact modified · heat stabilized	Injection molding	Request
HIGH-NYL® A27 TM-X H NATURAL	PA66/6	Impact modified	Injection molding	Request
HIGH-NYL® B27 G30 H BLACK	PA6	30% glass fiber · heat stabilized	Injection molding	Request
HIGH-NYL® B27 G30 H NATURAL	PA6	30% glass fiber · heat stabilized	Injection molding	Request
HIGH-NYL® B70 G30 H NATURAL	PA6	30% glass fiber · heat stabilized	Injection molding	Request
HIGH-NYL® B27 GF/M25 H	PA6	Glass fiber + mineral filled	Injection molding	Request
HIGH-NYL® PA6-0021 BM	PA6	High viscosity · pipe, film, cable sheathing	Extrusion	Request
HIGH-NYL® PA6.66 4085L	PA6.66	Film grade · food contact compliant	Extrusion	Request
HIGH-NYL® PA12 LPA-411HF	PA12	Low moisture absorption · high flow · connectors	Injection molding	Request
HIGH-NYL® eXten LPA-102EM	PA610	Pipe grade	Extrusion	Request
HIGH-NYL® Transparent CXT526LZC	Long-chain PA	Transparent · unreinforced	Injection / extrusion	Request
HIGH-NYL® Transparent GT-35	Long-chain PA	Transparent · unreinforced	Injection / extrusion	Request

For a polyamide, reinforcement ratio or color not listed, we develop a project-based formulation from sample to series production. Flame retardant (HIGH-FLAM®), TPE (HighPrene®) and high-performance (HIGH-TRON®) grades are also in our portfolio.

// Quick Comparison

See the whole series in one table

All values are taken from the manufacturer’s official technical data sheets (TDS). Click a product name to jump to its full technical breakdown.

Product	Fiber	Tensile	Modulus	HDT / Tm	Density	Flame
HIGH-TRON® PEEK 8800G	—	105 MPa	4.0 GPa	343 °C	1.3 g/cm³	V-0 @ 1.6 mm
HIGH-TRON® PEEK 8200G	—	98 MPa	3.7 GPa	343 °C	1.3 g/cm³	V-0 @ 1.6 mm

Values in the table are typical laboratory values and should not be used as specification values. Talk to our engineering team to confirm suitability for your application.

Project-based formulationIf the standard catalog does not meet your needs, we develop a formulation for the load, temperature and chemical conditions of your application.

Natural-color engineering plastic pellets — **Natural color**HIGH-NYL® natural grades and unreinforced HIGH-TRON® PEEK.

Black glass fiber reinforced polyamide pellets — **Black, glass fiber reinforced**PA6 and PA66 based GF30 grades; heat stabilized.

Transparent polyamide pellets — **Transparent polyamide**HIGH-NYL® Transparent: long-chain, unreinforced transparent PA.

Gallery photos: Teemeah, Amandaprc, Lluis tgn / Wikimedia Commons — CC BY-SA; cropped.

// Product Details

HIGH-TRON® Series portfolio

Full technical data sheet, processing parameters and typical applications for every product.

HIGH-TRON® PEEK 8800G

Unfilled PEEK — high flow

PEEK

Higher tensile strength (105 MPa) and flow than 8200G. Preferred for small parts with complex geometry.

105 MPaTensile strength

4.0 GPaElastic modulus

343 °CMelting point

1.3 g/cm³Density

Full technical data sheet

Mechanical properties

Tensile strength	105 MPaISO 527
Elastic modulus	4.0 GPaISO 527
Elongation at break	20.0 %ISO 527
Flexural strength	170GB/T 9341
Flexural modulus	4.1 GPaGB/T 9341
Charpy impact	5.0 KJ/m2ISO 179

Physical & thermal

Density	1.3 g/cm³ASTM D-792
Melting point	343 °CISO 11357
Glass transition temp.	150 °CISO 11357
Flame rating	V-0 @ 1.6 mmASTM D-635

Processing parameters

Melt temperature	355-375 °C
Mold temperature	170~200 °C
Pre-drying	3 to 5 hr

Precision medical partsSemiconductor componentsSmall-volume technical parts

Download TDS (PDF) Ask on WhatsApp Request a sample

HIGH-TRON® PEEK 8200G

Unfilled PEEK — standard viscosity

PEEK

Unreinforced, natural-color PEEK. High toughness with 30% elongation at break; suitable for injection molding thin-walled parts.

98 MPaTensile strength

3.7 GPaElastic modulus

343 °CMelting point

1.3 g/cm³Density

Full technical data sheet

Mechanical properties

Tensile strength	98 MPaISO 527
Elastic modulus	3.7 GPaISO 527
Elongation at break	30.0 %ISO 527
Flexural strength	150GB/T 9341
Flexural modulus	3.9 GPaGB/T 9341
Charpy impact	8.0 KJ/m2ISO 179

Physical & thermal

Density	1.3 g/cm³ASTM D-792
Melting point	343 °CISO 11357
Glass transition temp.	150 °CISO 11357
Flame rating	V-0 @ 1.6 mmASTM D-635

Processing parameters

Melt temperature	355-375 °C
Mold temperature	170~200 °C
Pre-drying	3 to 5 hr

Sterilizable medical partsInsulation componentsWear partsFood contact equipment

Download TDS (PDF) Ask on WhatsApp Request a sample

// Other Product Groups

The full portfolio

Long Carbon Fiber (LCF)14 grades · PEEK, PPA, PPS, PA66, PA12, PA6, TPU, CPP Long Glass Fiber (LGF)17 grades · PA66, PA6, PPA, PPS, HPP, CPP, TPU 3D Printing PelletsHIGH-STRAN® · PP, PETG, PETG-PC, PA6, PPS

Let’s choose the right material for your project together

Share the load, temperature and chemical conditions of your application; our engineering team will recommend a suitable formulation and send samples.

Request samples and a quote WhatsApp Download the catalog